- Samsung ML1610 ,ML1640, ML2010,ML2250 Disassemble
- Samsung ML-2250/XAA Manuals
- Download manual
- Before installing this printer driver Samsung ML-2250, read the following precautions:
- Samsung ML-2250 Series Manuals
- Samsung ML 2250 Technical Instructions
- Samsung ML-2250 Series User Manual
- Samsung ml 2250 printer manual
- Download Samsung ML-2250 Series User Manual
Page of Go. Show quick links. Hide Hide permanently. Table of Contents. Universal print driver guide user manual ver. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any changes, direct or indirect, arising from or related to the use of this manual. All rights reserved. Page 5 Setting Graphic Properties Page 8 Important Precautions and Safety Information When using this machine, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to people: Read and understand all instructions.
Use common sense whenever operating electrical appliances. Follow all warnings and instructions marked on the machine and in the literature accompanying the machine. Class I laser products are not considered to be hazardous.
Samsung ML1610 ,ML1640, ML2010,ML2250 Disassemble
Page Ozone Safety However, it is advisable that the machine be operated in a well ventilated area. If you need additional information about ozone, please contact your nearest Samsung dealer. Power Saver This printer contains advanced energy conservation technology that reduces power consumption when it is not in active use. Page Regulatory Compliance Statements Wireless devices that may be in your system are only qualified for use in the European Union or associated areas if a CE mark with a Notified Body Registration Number and the Alert Symbol is on the system label.
Samsung ML-2250/XAA Manuals
Page 15 This transmitter must not be collocated or operated in conjunction with any other antenna or transmitter.
Some circumstances require restrictions in wireless devices. Examples of common restrictions are listed below: Radio frequency wireless communication can interfere with equipment on commercial aircraft.
Current aviation regulations require wireless devices to be turned off while traveling in an airplane. Page Introduction Special Features Your new printer is equipped with special features that improve the print quality, giving you a competitive edge.
See page 4. Page 21 Printer Features The table below lists a general overview of features supported by your printer.
Cancel button Function Description Printing demo page In Ready mode, press and hold this button for about 2 seconds until all LEDs blink slowly, and release. Page Unpacking Unpacking Remove the Printer and all accessories from the packing carton.
Page Selecting A Location Selecting a Location Select a level, stable place with adequate space for air circulation. Allow extra space for opening covers and tray s. The area should be well-ventilated and away from direct sunlight or sources of heat, cold, and humidity. See the image below for clearance space. Be careful not to move the printer.
Before installing this printer driver Samsung ML-2250, read the following precautions:
Remove the toner cartridge from its bag and remove the paper covering the cartridge. Page 30 Gently shake the cartridge from side to side to distribute the toner evenly inside the cartridge. Cover it with a piece of paper if left exposed for more than a few minutes and keep it in a flat and clean place. Page 31 Grasp the handle and insert the cartridge into the printer until it snaps into place.
Close the front cover. Make sure that the cover is securely closed. Pull the tray out of the printer. Prepare a stack of paper for loading by flexing or fanning the paper back and forth. Straighten the edges on a level surface. Page 33 You can load previously printed paper.
The printed side should be facing up with an uncurled edge on top. If you experience problems with paper feed, turn the paper around.
Make sure that all four corners are flat in the tray.
Samsung ML-2250 Series Manuals
Pressing and unlatching the guide lock, slide the paper length guide out completely to extend the paper tray to its full length. Page 35 For the paper smaller than Letter, adjust the front paper length guide. Pinching the paper width guide as shown, move it toward the stack of paper until it lightly touches the side of the stack.
Using a Parallel Cable : To connect the printer to the parallel port of the computer requires a certified parallel cable. You will need to buy a USB 2. Make sure that both the printer and the computer are turned off.
Samsung ML 2250 Technical Instructions
If you are an ML user, you need to install the optional network interface card. Plug the other end into a properly grounded AC outlet and turn on the printer using the power switch. Hold down the Cancel button for about 2 seconds to print a demo page. See page 2.
Samsung ML-2250 Series User Manual
Page 45 After selecting the language and the component s , click Next. You are now accessed to the Samsung web site. Then reinstall the printer driver; From the Start menu, select Programs. Select Repair. When the reinstallation is done, click Finish. Select Remove. Then you will see a component list so that you can remove any of them individually.
Page Choosing Paper And Other Materials Choosing Paper and Other Materials You can print on a variety of print materials, such as plain paper, envelopes, labels, transparencies, and so on. To get the best possible print quality, use only high-quality copier-grade paper.
Page Selecting The Output Location Selecting the Output Location The printer has two output locations; the rear output tray and the top output tray.
Top output tray Rear output tray To use the top output tray, be sure that the rear output tray is closed. To use the rear output tray, open it. Paper comes out of the printer face-up, and each time a sheet of paper comes out, it falls down from the printer.
Printing from the Multi-Purpose Tray to the rear output tray provides a straight paper path. Page Loading Paper If you do not want to use the rear output tray, close the tray. The pages will stack on the top output tray.
Loading Paper Proper paper loading helps prevent paper jams and ensure trouble-free printing. Do not remove the paper tray while a job is printing.
Samsung ml 2250 printer manual
Tray1 Optional Tray2 Load a stack of paper into the tray and print. This also applies to other types of print materials. Page 59 Prepare a stack of paper for loading by flexing or fanning the paper back and forth. Place paper on the centre of the tray with the print side face up. Pay attention to the paper limit mark on the left inside wall of the tray.
Page 60 Slide the paper width guide and adjust it against the stack of print material without bending. Loading the Multi-Purpose Tray with the correct paper size allows you to select paper by size rather than paper source when you print from your software application.
Manually loading paper can be helpful when you want to check the print quality after each page is printed.
Download Samsung ML-2250 Series User Manual
Page 62 Open the rear output tray. When you print a document, you must select Manual Feed for Source from the software application, and then select the correct paper size and type.
Press the Cancel button on the printer to start feeding. Printing is started. Before loading envelopes into the Multi-Purpose Tray, make sure that they are undamaged and are not stuck together. Page 64 Flex or fan the edge of the envelope stack to separate the pages before loading. Load the envelopes onto the Multi-Purpose Tray with the flap side down.
The stamp area is on the left side and the end of the envelope with the stamp area enters the tray first. Page 65 When you print on envelopes, select the appropriate paper source, type, and size in the software application. For details, see page 4. After printing, close the Multi-Purpose Tray and the rear output tray.
Exposed areas can cause labels to peel off during printing, which can cause paper jams. Page 67 Adjust the guide to fit the width of the sheet of labels. When you print on labels, select the appropriate paper source, type, and size in the software application. Oils deposited on the transparency can cause print quality problems.